Operator Manual

OPERATION
68
T17 9020160 (NIL)
OPTIONS
SPRAY NOZZLE (OPTION)
The spray nozzle is used to clean the machine
and surrounding areas. The solution tank provides
a water/solution supply for the spray nozzle.
FOR SAFETY: When servicing machine, do
not power spray or hose off machine near
electrical components.
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, set parking brake, and remove key.
1. Turn on the machine.
2. Press the top of the Spray nozzle switch to
turn on the spray nozzle. The light on the
switch will come on when the spray nozzle is
turned on.
3. Open the left shroud to access the spray
nozzle.
4. Pull the spray nozzle out from the back of the
machine and clean as needed.
5. When finished cleaning, gently pull the hose
and allow the spray nozzle hose to retract
back into the machine.
NOTE: Continue holding onto the spray nozzle
and control the hose while it is retracting back into
the machine. The machine and / or the spray
nozzle assembly could be damaged if the spray
nozzle hose is released and allowed to rapidly
retract into the machine.
6. Press the bottom of the Spray nozzle switch
to turn off the water supply. The light on the
switch will turn off when the spray nozzle is
turned off.
NOTE: Be sure the Spray nozzle switch is turned
off before continuing scrubbing. The spray nozzle
pump could be damaged if the switch is left on
while scrubbing.