Operator Manual

OPERATION
70
T17 9020160 (3−2019)
8. Verify that the 1−STEP Scrub button is off.
Standard Panel Pro−Panel
9. Press the top of the High pressure washer
switch to turn on the high pressure washer.
The light on the switch will come on when the
high pressure washer is turned on.
10. If necessary, adjust the pressure. Turn the
knob clockwise to increase pressure and
counterclockwise to decrease pressure.
+
−
NOTE: Adjust the pressure at the wand before
adjusting it at the system.
11. Squeeze the trigger to begin cleaning.
WARNING: Do not spray people or
animals. Severe personal injury can
result. Wear eye protection. Hold
sprayer with two hands.
12. When finished cleaning, release the trigger.
13. Press the bottom of the Pressure washer
switch to turn off the high pressure washer.
14. Point the high pressure washer wand in a
safe direction and squeeze the trigger to
relieve pressure from the system.
15. Turn off the machine.
16. Disassemble the hose and wand and return
them to the proper storage locations.