Operator Manual

OPERATION
73
T17 9020160 (3−2019)
7. Secure the vacuum wand hose collar to the
vacuum hose handle.
8. Extend the vacuum wand handle to the
desired length and twist the vacuum wand
handle to tighten.
9. Turn on the machine.
10. Press the Vacuum fan/squeegee button to
turn on the vacuum fan. The squeegee will
completely lower.
Standard Panel
Pro−Panel
11. Vacuum the floor.
12. When finished vacuuming, press the Vacuum
fan/squeegee button to turn off the vacuum
fan. The squeegee will raise.
13. Turn off the machine.
14. Disconnect the vacuum wand hose from the
rear squeegee vacuum hose and disassemble
the vacuum wand.
15. Return the vacuum wand components to the
storage tray located on top the battery
compartment cover.
16. Reconnect the vacuum hose to the rear
squeegee.
17. Lift the rear bumper door / step to the raised
position and secure to the rear bumper.