Operator Manual

OPERATION
74
T17 9020160 (3−2019)
LIVE WAND (OPTION)
The live wand uses a separate vacuum system to
pick up dry debris that could get tangled in the
cleaning system. The dry vacuum system can be
used separately off the machine or on the
machine with an operator sitting in the seat.
OPERATING THE LIVE WAND
(OFF MACHINE)
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, set parking brake, and remove key.
1. Remove the live wand from its storage
location.
2. Turn on the machine.
3. Turn on the live wand switch.
NOTE: The live wand will not operate while off
the machine unless the machine parking brake is
set.
4. Vacuum dry debris as needed.
5. Turn off the live wand switch and return the
live wand to storage location when finished.
OPERATING THE LIVE WAND
(ON MACHINE)
1. Move the live wand from the storage location
to the ready−to−use position.
2. Turn on the live wand switch.
NOTE: The live wand will not turn on until it is
removed from the read−to−use position.
3. Operate the machine normally until the live
wand is needed.