Operator Manual

OPERATION
75
T17 9020160 (3−2019)
4. Lift the live wand from the ready−to−use
position and vacuum dry debris as needed.
The vacuum will start automatically.
NOTE: The machine speed will decrease when
the live wand is removed from the ready to use
position.
5. Place the live wand into the ready−to−use
storage location when finished. Make sure the
wand is secured properly which turns off the
vacuum.
EMPTYING THE LIVE WAND VACUUM DEBRIS
TRAY
The live wand collects dry debris in a vacuum
debris tray. Empty the vacuum debris tray daily.
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, set parking brake, and remove key.
1. Unlatch and open the live wand vacuum
cover.
2. Unlatch and remove the live wand hose.
3. Hang the live wand hose on the hanging
bracket.
4. Remove and empty the debris tray. Place the
tray back in the vacuum chamber.
5. Replace and latch the live wand vacuum
hose.
6. Close and latch the live wand vacuum cover.