Operator Manual

OPERATION
79
T17 9020160 (11−2015)
EMPTY THE PRE−SWEEP DEBRIS HOPPER
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, set parking brake, and remove key.
1. Loosen both Pre−Sweep cover latches.
2. Lift the Pre−Sweep cover and engage the
Pre−Sweep cover support to lock the cover
open.
3. Remove the debris hopper from the
Pre−Sweep assembly and empty the hopper.
4. Reinstall the debris hopper into the
Pre−Sweep assembly.
5. Check the vacuum debris bag. Replace the
vacuum debris bag if it is full or damaged.
6. Disengage the Pre−Sweep cover support and
lower the Pre−Sweep cover.