Operator Manual

OPERATION
81
T17 9020160 (1−2018)
SLIDE OUT BATTERY (OPTION)
The slide out battery allows the operator a quick
and easy way to remove and replace the
batteries. Use proper battery pulling and lifting
equipment and procedures based on the battery
size and weight. See SPECIFICATIONS section.
The battery slide out height is 508mm (20 in.).
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, set parking brake, and remove key.
1. Lift the battery compartment cover open and
engage the support.
2. Open the right shroud.
3. Disconnect the battery side cable connector
from the machine by pulling down on the
connector. Do not pull on the cables.
4. Remove the battery retainer plate from the
machine.
5. Position the battery cart near the battery
compartment.
FOR SAFETY: When servicing machine: Keep
all metal objects off batteries. Use a
non−conductive battery removal device. Use a
hoist and adequate assistance when lifting
batteries. Battery installation must be done by
trained personnel. Follow site safety
guidelines concerning battery removal.
6. Slide the battery from the machine and onto
the battery cart.
7. Install the new battery into the battery
compartment.