Operator Manual

MAINTENANCE
95
T17 9020160 (4−2017)
3. If necessary, press the navigation buttons to
access additional screens. Press the charger
stop / start / enter button to enter selection.
The charger will return to the default screen.
Refer to manufacturers operator manual for
additional information.
NOTE: If the charger cable must be disconnected
from the battery before they are fully charged,
press the charger stop / start / enter button to
stop charging. Be sure STOP appears on the
display and the red stop charge light is illuminated
before disconnecting the battery charger cable.
4. The battery charger status indicators will
illuminate from left to the right as the battery
is charging. COMPLETE will appear in the
display, all the charger status indicators will
be illuminated, and the Tennant charger will
stop charging when the battery is completely
charged.
5. After the batteries have completely charged,
disconnect the charger connector from the
battery cable connector.