Operator Manual

MAINTENANCE
96
T17 9020160 (3−2019)
6. Reconnect the battery connector to the
machine connector.
FOR SAFETY: When servicing machine do not
disconnect the off−board charger’s DC cord
from the machine receptacle when the charger
is operating. Arcing may result. If the charger
must be interrupted during charging,
disconnect the AC power supply cord first.
7. Close the battery compartment top cover.
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, set parking brake, and remove key.
TO CHARGE WITH ENERSYS BATTERY
CHARGER
1. Turn on the battery charger if required.
WARNING: Batteries emit hydrogen gas.
Explosion or fire can result. Keep
sparks and open flame away. Keep
covers open when charging.
NOTE: If there are charger fault codes when the
battery is plugged into the battery charger, the
fault codes will appear on the charger display.
Refer to the battery charger manual for fault code
definitions.
2. Observe the charger display. The charging
indicator will illuminate on the display when
the battery is charging. This is the charger
default screen.