T300e Operator Manual

OPERATION

Tennant T300e (03- 2015)

ATTENTION: If cleaning detergent is accidentally

cycled through ec-H2O system, immediately turn the

ec-H2O system off. Drain solution tank, refill with cool

water and operate the ec-H2O system to flush out

detergent.

FIG. 36

ec-H2O INDICATOR CONDITION

Solid blue Normal operation

Blinking blue/red Water conditioning

cartridge expired.

Replace cartridge.

Solid or blinking red See Service Indicator

Codes.

4. Lower the scrub head to the floor by stepping on

the scrub head lift pedal as shown (Figure 37).

FIG. 37

5. Lower the squeegee assembly to floor by stepping

on foot pad as shown (Figure 38). To raise

squeegee assembly, place toe under foot pad and

lift. The vacuum motor will start when squeegee

assembly is lowered.

FIG. 38

6. Drive models - push the directional lever to the

forwardpositiontogoforward(Figure39).To

reverse the machine pull the directional lever

backwards.

FIG. 39

7. To begin scrubbing, pull the start bail (Figure 40).

FIG. 40

8. Drive models - Adjust the scrubbing speed by

turning the speed dial to the desired speed

(Figure 41).

Push models - Slowly push the machine forward.

The rotating brush(es) will help assist the machine

forward.

FIG. 41