T300e Operator Manual

OPERATION

Tennant T300e (02- 2017)

DRAINING TANKS

FOR SAFETY: Before leaving or servicing machine,

stop on level surface, turn off machine, remove key

and set parking brake if equipped.

DRAINING RECOVERY TANK

Drain and clean the recovery tank daily and between

solution tank refills.

1. T ransport the machine to drain area.

2. For models equipped with drain hose caps, hold

the hose upward, remove cap then slowly lower

hose to drain. For models equipped with flow

control valve drain hose, lower hose and slowly

open valve to drain (Figure 51).

FIG. 51

NOTE: When using a bucket to drain the machine, do

not use the same bucket to fill the solution tank.

3. Remove and clean the float shut-off screen (Figure

52).

FIG. 52

4. Remove the debris tray and empty (Figure 53).

FIG. 53

5. Rinse out the recovery tank with clean water and

wipe clean of any soil residue (Figure 54).

FIG. 54

DRAINING SOLUTION TANK

Drain the solution tank daily .

1. T ransport the machine to drain area.

FOR SAFETY: Before leaving or servicing machine,

stop on level surface, turn off machine, remove key

and set parking brake if equipped.

2. To drain remaining water from solution tank, pull

the solution hose from the accessory rail (Figure

55).

FIG. 55

Firmly reconnect the solution hose to accessory rail

after draining tank.