T300e Operator Manual

MAINTENANCE

Tennant T300e (02- 2017)

MACHINE MAINTENANCE

To keep the machine in good working condition, simply

perform the following maintenance procedures.

FOR SAFETY: Before leaving or servicing machine,

stop on level surface, turn off machine, remove key

and set parking brake if equipped.

FOR SAFETY: When servicing machine wear

personal protection equipment as needed. All

repairs must be performed by trained personnel

AFTER DAILY USE

1. Drain and rinse out the recovery tank (Figure 58).

See DRAINING TANKS.

FIG. 58

2. Remove the debris tray and empty (Figure 59).

FIG. 59

3. Remove and clean the float shut-off screen

(Figure 60).

FIG. 60

4. Drain and rinse out the solution tank (Figure 61).

FIG. 61

5. Disk scrub head - Turn pad over or replace when

worn (Figure 62).

FIG. 62

Orbital scrub head - T urn the work pad over or

replace when worn (Figure 63).

FIG. 63

6. Insta-Click pad driver/brushes - clean any debris

buildup from hub connection area (Figure 64).

FIG. 64