Assembly Instructions

ManualsBrandsTennsco ManualsBench Tops & AccessoriesStackable and Mountable Drawer WBD-1 for Workbenches 15"W x 18"D x 8 1/4"H - Medium Gray

ASSEMBLY INSTRUCTIONS & PARTS MANUAL

PK-1420719

Stackable Workbench

Drawer Unit

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE

Tennsco LLC.

, Dickson, TN 37056-1888 • (866) 446-8686

GENERAL SAFETY INFORMATION

Some parts may have sharp edges. CARE must be taken when handling various pieces to avoid injury.

For safety, wear a pair of work gloves when assembling or performing any maintenance.

LIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder. This warranty shall not apply in

the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modication or repair by persons not authorized by Seller, where goods are damaged during

shipment, or where the date stamps on the goods have been defaced, modied or removed. UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED:

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT SELLER’S OPTION, AND SHALL IN NO

EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.

NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the

goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty

and are returned within the warranty period stated above.

Summary of content (4 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS & PARTS MANUAL Stackable Workbench Drawer Unit RETAIN INSTRUCTIONS FOR FUTURE REFERENCE GENERAL SAFETY INFORMATION Some parts may have sharp edges. CARE must be taken when handling various pieces to avoid injury. For safety, wear a pair of work gloves when assembling or performing any maintenance. LIMITED WARRANTY Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder.
PAGE 2
ASSEMBLY OF STACKABLE WORKBENCH DRAWER Two people are recommended for assembly. Approximate assembly time: 20-25 minutes. Tools required: slotted screwdriver, Phillips screwdriver, and 7/16” wrench or nut driver. The reference numbers used throughout this sheet refer to the illustration on the back cover. This is to help you to identify the various parts as they are mentioned. Assembly for Steel Top 1. Remove the drawer (Ref. No. 1) from the housing (Ref. No.
PAGE 3
Assembly for Wood Top 1. Remove the drawer from the housing by first pulling it to the full extent that the suspensions allow. Once the drawer is fully open, move the plastic lever inside the suspension member to release the suspension sections. Assembly for Drawer to Drawer 1. Remove the drawer from the housing by first pulling it to the full extent that the suspensions allow. Once the drawer is fully open, move the plastic lever inside the suspension member to release the suspension sections.
PAGE 4
REPLACEMENT PARTS ⁭ Mounting Brackets (Ref No 3) ⁭ Tray (Ref No 4) ⁭ Drawer Housing (Ref No 2) ⁭ wer Dra nsion e ) p s Su f No 6 (Re ⁭ ⁭ r ide Div No 5) f e R ( ⁭ eys K with ock o 7) L N Cam (Ref 1/4”-20 x 5/8” Bolt (Ref No. 8) 1/4”-20 Nut Drawer Suspension (Ref No 6) ⁭ (Ref No. 9) ⁭ Drawer (Ref No 1) #14 x 1/4” Hex Head Slotted Wood Screw (Ref No. 10) REF. NO.