Instructions / Assembly

Step 4. DRYWALL Wall Preparation

Add +1 3/4” to the door height (H) and measure up from the floor to find

the height of the center of the track. Ensure a gap of 3/8" - 1/2" at the

bottom of the door and make marks on the wall on both the left and right

sides of the door opening. A minimum of 2” track clearance must be

maintained on both the left and right sides of the door opening.

Step 5. DRYWALL Wall Preparation

Use your guide marks to position the track in place, ensuring that it is level.

Mark the mounting holes on the track using a pencil. You do not need to

pre-drill the holes.

Step 6. DRYWALL Track Installation

When installing into the wall, insert using the provided wall screws. Align

each spacer to the track holes, inserting spacers and screws (with

washers), securing with a wrench.

Step 7. Hanging the Door

Place the assembled door onto the secured track and rotate each

anti-jump bumper so that if provides a buffer between the track and the

door. Test for proper operation by sliding the door side-to-side.

78 3/4 " (2000mm)

Minimum 2”

(51 mm)

3/8" (9.5 mm) –

1/2" (12.7 mm)

Gap under the

door

Door Height + 1 3/4"

H+1 "