Installation Guide

Model#:19641-001
LED Adjustable Desk Lamp
Growth Product, LLC. warrants all of its lighting
fixtures against defects in materials and workman-
ship for one (1) year from the date of original
purchase.
Electronic
parts
including
passive
infrared devices, photoelectric switching mecha-
nisms, and light bulbs provided with Growth
products are warranted for 30 days from the date
of original purchase.
This warranty does not cover parts becoming
defective
due to misuse, accidental damage,
improper handling and/or installation and specifi-
cally excludes liability for indirect, incidental or
consequential
damages. Product found to be
defective may or may not be replaced with same or
like type product, contingent on the nature of the
defect, and or replacement availability and or
compensated
for at aprorated value. This
warranty gives you specific rights and you may
also have other rights, which vary from state to
state. Proof of purchase is required to exercise the
warranty.
LIMITED WARRANTY
1) Do not disassemble the product.
2) Only use the power adapter provided with the product.
3)
Altering or modifying the lamp in any way will render the product
unsafe.
4) Do not use the lamp fixture if the power cord is cut or damaged.
5) Do not use the lamp fixture if the power plug is bent or broken.
6) Do not use the lamp fixture if any part of it breaks.
7) Do not look at the LED light source directly.
8) Indoor use only.
9) Do not use the lamp in high-temperature or high humidity
environments. This product is NOT waterproof.
10) Do not cover this product.
11) The lamp fixture is not designed to support additional weight, do
not hang any object from any part of the lamp.
12) Unplug the lamp fixture if it is not being used for extended
periods of time.
13) Avoid exposure to direct sunlight or heat vent. This could cause
discoloration or damage to the lamp fixture.
14) Place the lamp on a stable, level surface.
CAUTION
1) LED desk lamp ----------------------------------1PC
2) LED desk lamp manual -----------------------1PC
3) LED power adpater -----------------------------1PC
1Connect the DC Plug into the base of the lamp. Then
connect the wall plug adapter to the electrical outlet.
2) Please use the following key for the modes of operation.
FEATURE &
FUNCTION
HOW
TO USE
PACKAGE
CONTENTS
1) Dimmer Adjustment: Change light levels with the three
step dimming. Touch to adjust the brightness to meet
your needs.
2) Position Adjustment: Please see the below diagrams
for the full range of positions available.
Touch Switch with Three Step Dimming
High, Medium, Low, Off
TROUBLE
SHOOTING
In the event the lamp fixture will not turn on or is flickering:
1) Check to that the power cord is plugged into the power
outlet/socket and making a proper connection.
2) Check the power adapter’s connection to the lamp fixture
to ensure that it is properly connected.

Summary of content (3 pages)