Instructions / Assembly

Main
function
Caution
Operation
instruction
Operation
instruction
Model#: 20099-000
LIMITED WARRANTY
1) Do not disassemble the product.
2) Only use the power adapter provided with the product.
3) Altering or modifying the lamp in any way will render the product
unsafe.
4) Do not use the lamp fixture if the power cord is cut or damaged.
5) Do not use the lamp fixture if the power plug is bent or broken.
6) Do not use the lamp fixture if any part of it breaks.
7) Do not look at the LED light source directly.
8) Indoor use only.
9) Do not use the lamp in high-temperature or high humidity
environments. This product is NOT waterproof.
10) Do not cover this product.
11) The lamp fixture is not designed to support, additional weight.
Do not hang any object from any part of lamp.
12) Unplug the lamp fixture if it is not being used for extended
periods of time.
13) Avoid exposure to direct sunlight or heat vent. This could cause
discoloration or damage to the lamp fixture.
14) Place the lamp on a stable, level surface.
bluetooth speaker21
Wireless speaker Music player
LED Desk Lamp
Wireless Music Speaker
Color Temperature Control
Adjustable LED Head
ON/OFF: Touch to alternate the lamp between On and Off.
COLOR: Touch to alternate between color temperatures
cool light, neutral light and warm light.
UP: Touch to increase the brightness.
DOWN: Touch to decrease the brightness.
1) Connect the DC plug into the back of the base, then plug the two
prong plug into the AC power outlet.
2) Please use the following controls for the lamp operation.
2A
Speaker Operation
1) Press and hold On/Off button for 3 seconds to turn on the speaker,
you will hear a beep to prompt the wireless mode.
Wireless Connection ( for reference):
2) Open your bluetooth device (mobile phone,computer etc.), click and
boot the bluetooth fuction, scan and check the bluetooth equipment,
this will take a few seconds denpending on the equipment, when the
equipment name“LED Desk Lamp” is displayed in the list equipment
connected, click it and the device will automatically match successfully
after a few seconds , and the speaker will make a “di di” voice to prompt
successful bluetooth connection.
At this time, you can play the audio files by the software of your bluetooth
device and the bluetooth speaker will perform the optimal aspect of music.
Next time the speker will be connected automatically with your bluetooth
device.
NOTE: Any bluetooth connection questions, please carefully read
the user manual of your bluetooth device before connection.
Audio Jack Connection:
3) Plug the audio jack from your audio device (included) into the audio
port located in the back of the speaker.
4) Please use the following controls for music operation.
You can also control the speaker through your audio device.
LED Desk Lamp Operation
Press and hold for 3 seconds to to turn the
power on/off
Press the key to play or pause the music.
1. Press and hold for 3 seconds to play the next song.
2. Press this buttom to turn the volume up
1. Press and hold for 3 seconds to play the previous song.
2. Press the button to turn the volume down
FCC
Statements
This lamp has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment on and off, the user is encouraged to try to correct the
interference by one or more of the following:
Reorient or relocate the receiving antenna.
Increase the separation between the lighting unit and receiver.
Connect the lighting unit into an outlet on a circuit other than the outlet
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for assistance.
Please hold the base and adjust
the lamp arm and lamp head to
position the light as desired.
3) Position Adjustment: Please see the
diagrams for the full range of positions
available.
Lamp head adjustable range of 180 °
(excessive adjustment activity joint
part of the product can lead to
functional damage) .
COLOR
C
Note: There is a momentary flash when the light is at the maximum
brightness and maximum volume simultaneously. This is to alert you
of maximum performance.
Growth Product, LLC. warrants all of its lighting
fixtures against defects in materials and workmanship
for one (1) year from the date of original purchase.
Electronic parts including passive infrared devices,
photoelectric switching mechanisms, and light bulbs
provided with Growt h products are warranted for
30 days from the date of original purchase.
This warranty does not cover parts becoming
defective due to misuse, accidental damage,
improper handling and/or installation and specifically
excludes liability for indirect, incidental or
consequential damages. Product found to be
defective may or may not be replaced with same or like
type product, contingent on the nature of the defect,
and or replacement availability and or compensated
for at a pro-rated value. T his warranty gives you
specific rights and you may also have other rights,
which vary from state to state. Proof of purchase is
required to exercise the warranty.