User's Manual

If there is a more recent version
available, it will ask you to update
the firmware. If you agree to
the update, the setup app will
activate the Bootloader mode
on the Tentacle. On a Windows
computer it may take some time,
because Windows might have to
install a Bootloader driver first.
During the firmware update ensure that your laptop has
suicient battery or is connected to the mains. Also ensure you
have a proper USB connection during a firmware update. In the
unusual case that the firmware update fails, your device just
needs to be restored. In this case please contact:
[e-mail]
Please note: The Tentacle Sync Studio software or the
Tentacle Timecode Tool software should not be running at
the same time as the Setup App. The Tentacle can only be
detected by one Tentacle software at a time.
22