User's Manual

BLUETOOTH & CABLE SYNC
The Setup Software for Tentacle SYNC E allows you to
wirelessly sync a number of Tentacle SYNC Es with each other
via Bluetooth (tested with up to 44 units).
WIRELESS SYNC
To perform the Wireless Sync, just open the Setup App on a
mobile device and add all Tentacle SYNC Es to the monitoring
list. In that list you will find the button WIRELESS SYNC.
• Tap on WIRELESS SYNC and a small window will pop up
• Click on the frame rate and select the desired frame rate
from the drop down menu
• Set a starting time for the timecode. If no time is set, it will
start with Time of Day
• Press START and all Tentacles will synchronize one after
another within a few seconds
During the synchronization process the status information of
each Tentacle is highlighted and displays Sync In Process. Once
the Tentacle is synchronized, the information is highlighted in
green and it says Sync Done.
7