User's Manual

SYNCHRONIZATION VIA CABLE
If you don’t have a mobile device at hand, you can synchronize
Sync E units with each other via the included 3.5 mm cable
through the mini jack port as well.
• Start one Tentacle in Green Mode (master) and all other
Tentacles in Red Mode (JamSync).
• Consecutively, connect all Tentacles in Red Mode to the one
Tentacle in Green Mode with the mini jack cable enclosed
in the Set. Each Tentacle connected to the „master“ will
change from Red into Green Mode. Now all Tentacles are in
sync and flashing green simultaneously on the first frame.
Additional information: You can use an external timecode
source to define a master and then follow from step 2. To
synchronize all your Tentacles to an external timecode.
Please note: We recommend to feed every recording device
with the timecode from a Tentacle to ensure frame accuracy
for the entire shoot.
9