User Manual

Attention

Thanks for choosing our VHD series conference cameras.

Please read this manual carefully before using the product.

1. Foreword

·To avoid damage from stress, violent vibration, soaking during tra-

nsportation, storage and installation.

·Take care of each components of camera during installation, and

install camera at where is affordable enough, to avoid drop or scra-

tches of camera case.

·Handle the camera parts gently, do not squeeze the camera units

hard. Please do not touch the camera lens by hand directly to avo-

id the lens scratched and image quality affected.

·Do not apply excessive voltage. (Use only the specified voltage)

Otherwise, you may get an electric shock or a fire may occur.

·Do not aim the camera at the sun or the other high luminous obje-

cts, otherwise it may cause image blurring or lens flare, even cause

permanent damage to the camera.

·Do not clean camera with active chemical or corrosive detergents,

and remove dust or dirt on the surface of the lens with a blower (C-

ommercially available)

·Do not disassemble any camera components, in case of abnormal

operation; contact your authorized dealer or the store where you p-

urchased the product.

(1) HD conference camera (2) DC12V-2A power supply

(3) Ceiling mount (4) Mounting screws

(5) Manual (6) Remote control

(7) Serial port control cable (8) USB cable

2. Notice

3. Supplied Accessories