Certificate Of Compliance

Certificate: 70070506
Project: 70191063
Master Contract: 265559
Date Issued: 2018-09-14
DQD 507 Rev. 2016-02-18 Page 2
CONDITIONS OF ACCEPTABILITY
(1) The operation of the equipment have to be carefully followed with manufacturer’s Operation Manual.
(2) If at any time there is a conflict between the system safety provisions and any relevant local (national or
regional) requirements, the local requirements always take precedence.
(3) Equipment is not to be used for other flammable liquids not specified in the Operation Manual.
(4) Equipment has not been evaluated for use in Hazardous Locations
APPLICABLE REQUIREMENTS
CSA Standards:
CAN/CSA-C22.2 No. 61010-1-12 - Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use, Part 1: General Requirements
UL Standards:
UL Std. No. 61010-1 (3
rd
Edition) - Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 1: General Requirements
MARKINGS
The manufacturer is required to apply the following markings:
 Products shall be marked with the markings specified by the particular product standard.
 Products certified for Canada shall have all Caution and Warning markings in both English and French.
Additional bilingual markings not covered by the product standard(s) may be required by the Authorities Having
Jurisdiction. It is the responsibility of the manufacturer to provide and apply these additional markings, where
applicable, in accordance with the requirements of those authorities.
The products listed are eligible to bear the CSA Mark shown with adjacent indicators 'C' and 'US' for Canada and
US (indicating that products have been manufactured to the requirements of both Canadian and U.S. Standards) or
with adjacent indicator 'US' for US only or without either indicator for Canada only.
The following markings appear on the product:
1. Submitter’s identification (company name and/or file number and/or registered tradename);
2. Marking on the unit that indicates the manufacturing location if the equipment is manufactured at more than
one factory location;
3. Model designation;
4. Electrical rating;
5. Date of manufacture: Month and year of manufacture or date code. If a serial number is used instead of date
of manufacture, a record of serial numbers shall be kept traceable to date of manufacture. (Not related to date
of sale).
6. The products listed are eligible to bear the CSA Mark shown with adjacent indicators ‘C’ and ‘US’ for
Canada and US, or with adjacent indicator ‘US’ for US only, or without either indicator for Canada only:
, or , or .