Data Sheet

Copyright © Terabee 2016
1 About the TeraRanger Distance OSD
1.1 Inside the Package
You will receive the following items when purchasing a TeraRanger Distance OSD:
● the TeraRanger Distance OSD
● power cable with open ends (10cm long)
● one cable to connect TeraRanger One to TeraRanger Distance OSD (22cm long)
● micro-USB cable (50cm long)
1.2 Dimensions and Mounting
The TeraRanger Distance OSD provides two mounting holes,
which are designed for M2.5 screws. The individual distances
between the holes are shown in the figure to the right. You can
use it with or without the included case, but pay attention to the
risk of short circuit if you mount the TeraRanger Distance OSD
without the case. The following should also be taken into
consideration when mounting the TeraRanger Distance OSD:
● Do not mount the OSD board to hot surfaces or near other
sources of heat. If possible, allow the board to properly
radiate its heat in a ventilated place.
● Take the usual precautions for sensitive electronics such
as keeping a safe distance from strong electric and magnetic fields, strong radio emitters,
strong heat sources, etc...
Terabee Website:
90 Rue Henri Fabre Technical support:
01630 Saint-Genis-Pouilly Commercial:
www.teraranger.com
[e-mail]
[e-mail]
3