Data Sheet

Copyright © Terabee 2016
You can set-up threshold distances for all the sensors. When a threshold distance is
breached the distance data for that sensor will display in a flashing mode until the threshold has
been re-established.
CONGRATULATIONS ! The new configuration you just set can be saved in the Distance OSD
by simply pressing the “Submit” button:
2.2 Firmware Upgrade
To upgrade the TeraRanger Distance OSD firmware, please follow this procedure:
● Select File ➡ Upload Firmware
● Unplug and replug the USB cable, and then press “OK”
● Press “Select FW” and select the new firmware with the file explorer
● Press “Upgrade” and wait until the operation finishes
● Close the update assistant and unplug and replug the USB cable to set the OSD in
normal operation
Terabee Website:
90 Rue Henri Fabre Technical support:
01630 Saint-Genis-Pouilly Commercial:
www.teraranger.com
[e-mail]
[e-mail]
9