Product Specifications







Themodular,plugn’playsolutionformultiple
distancesensors
This onscreen display for TeraRanger One shows distance values from         
up to 8 sensors directly on your analog video feed. A graphical user            
interface for your computer allows you to choose where to display the           
values, allowing you to place the data according to your choice and           
other OSD data that you may already be displaying on the video feed.            
You can also setup offset distances and threshold distances. When a          
threshold distance is breached the distance data for that sensor will          
display in a flashing mode until the threshold has been reestablished.          
This visual warning system isperfect for drone flight in close proximity to           
obstaclesandforcomplexlandings.
Technical Specifications:
Protection and
mounting:
Use with or without the case. 2 mounting holes for M2.5 screws
Size:
L 56 x W 56 x H 14mm (with case) 
L 50 x W 50 x H 8mm (without case) 
Weight:
15g without the case, 25g with the case
Supply voltage:
12V DC recommended (10‐20V DC accepted)
Supply current:
60mA (plus the consumption of each connected TeraRanger sensor)
@12V in general environment
Interfaces:
Eight TeraRanger One ports to connect up to eight sensors
Micro‐USB (2.0) for firmware updates and product configuration
3‐Pin Dupont connection video in/out

Inthebox:
OSDboard
powercablewithopenends
onecabletoconnectaTeraRangerOnetotheOSDboard(22cm)
microUSB(2.0)cable

TeraRangerDistanceOSD,sensorsandadditionalcablescanbepurchasedfromouronlinestore
at:
www.teraranger.com 
Terabee Commercialenquiries:[e-mail]
90RueHenriFabre Technicalaftersalessupport:[e-mail]
01630SaintGenisPouilly
France

