Product Specifications
Themodular,plugn’playsolutionformultiple
distancesensors
This onscreen display for TeraRanger One shows distance values from
up to 8 sensors directly on your analog video feed. A graphical user
interface for your computer allows you to choose where to display the
values, allowing you to place the data according to your choice and
other OSD data that you may already be displaying on the video feed.
You can also setup offset distances and threshold distances. When a
threshold distance is breached the distance data for that sensor will
display in a flashing mode until the threshold has been reestablished.
This visual warning system isperfect for drone flight in close proximity to
obstaclesandforcomplexlandings.
Technical Specifications:
Protection and
mounting:
Use with or without the case. 2 mounting holes for M2.5 screws
Size:
L 56 x W 56 x H 14mm (with case)
L 50 x W 50 x H 8mm (without case)
Weight:
15g without the case, 25g with the case
Supply voltage:
12V DC recommended (10‐20V DC accepted)
Supply current:
60mA (plus the consumption of each connected TeraRanger sensor)
@12V in general environment
Interfaces:
Eight TeraRanger One ports to connect up to eight sensors
Micro‐USB (2.0) for firmware updates and product configuration
3‐Pin Dupont connection video in/out
Inthebox:
OSDboard
powercablewithopenends
onecabletoconnectaTeraRangerOnetotheOSDboard(22cm)
microUSB(2.0)cable
TeraRangerDistanceOSD,sensorsandadditionalcablescanbepurchasedfromouronlinestore
at:
www.teraranger.com
Terabee Commercialenquiries:teraranger@terabee.com
90RueHenriFabre Technicalaftersalessupport:support@teraranger.com
01630SaintGenisPouilly
France