User Manual

checking some of the basic parameters of the sensor. It also provides a way to easily

upgrade the firmware running on the device.

The GUI is available for download here: GUI Download. (See “Download” section of the

TeraRanger Evo product page). Please ensure you are using GUI version 1.0.2 or later.

If you need to identify which TeraRanger Evo sensor is currently connected, in the GUI

select, Help > About



3.1.1



Prerequisites

For usage on Windows (7, 8) operating system, please download the Virtual COM Port driver

from http://www.st.com/en/development-tools/stsw-stm32102.html and follow the ”ReadMe

file” instructions given by the installer. After successful installation, unplug the interface

for a few seconds, and plug it back in. The virtual COM port should now be available on your

PC.

Users of Windows 10 do not need to download this driver as the built in Windows driver is

recommended.



3.1.2



Basic Operation

Make sure your TeraRanger Evo is connected to a USB port on your computer. In the GUI

select File > Connect. You should immediately see a distance reading in millimetres and the

status should change to ‘Connected’.

Terabee, 90 Rue Henri Fabre, 01630, St Genis-Pouilly, France

5/13