User Manual
3.1.3Firmware Upgrade
The current firmware version on your TeraRanger Evo can be found by selecting Help >
About in the graphical user interface. It is possible to upgrade the firmware running on
your device if a new firmware version is made available on the Terabee website.
Please note the Upgrade Firmware feature is only supported on Windows 7, 8 and 10.
Please carefully follow the steps outlined below to avoid permanently disabling your
device.
● Install the latest version of the TeraRanger Evo GUI on your computer
● Download the latest firmware file from the Terabee website
● In the GUI Select File > Connect and then File > Upgrade Firmware
● You will be presented with a dialog window asking you to confirm your choice
● After confirming your choice, a new dialog window will present you with
instructions on selecting the firmware file and launching the upgrade process,
read the instructions carefully.
● Press ‘Select File’ and select the new firmware file with Windows File Explorer
● Press ‘Upgrade’ and wait until the operation finishes
● Close the Upgrade dialog box
Copyright © Terabee 2021
Terabee, 90 Rue Henri Fabre
01630, St Genis-Pouilly, France (next to CERN)
7/17