User Manual
3.2Connecting the TeraRanger Evo to a Host Computer
TeraRanger Evo can interact as a virtual COM port using the following configuration:
115200 bit/s, 8 data bits, no parity bit and one stop bit.
In Windows you can also use any terminal emulation software of your choosing,
however we suggest you use HTerm (http://www.der-hammer.info/terminal/). Extract
the downloaded zip file to the folder of your choice, open it and double click on the
“HTerm.exe” document.
Connect the TeraRanger Evo to your computer and select the corresponding USB port
(click “R” button to refresh the port list). Select values for the following fields: (1)
Baudrate, (2) Data Bits, (3) Parity, (4) Stop Bits. For easier readings, select the “LF” option
for “Newline at” tab. See Figure below for visual instructions.
Once you have selected the USB port and required values, click on the “Connect” button.
The data will now appear in the “Received data” box (Figure below).
Copyright © Terabee 2021
Terabee, 90 Rue Henri Fabre
01630, St Genis-Pouilly, France (next to CERN)
8/17