Quick start Guide

ManualsBrandsTeradek ManualsCamcorder & Camera PeripheralsSlice 656 H.264 Rackmount H.264 Encoder

Stream Joystick:

, : Selects options from streaming/recording prompts

● (button press): Returns to main status screen, start/stop recordings and broadcasts

Menu Joystick:

▲,▼: Select menu items, change status screen on main display, select characters

: Back, move to higher menu level

,● (button press): Confirm selection, open selected menu

▲

NETWORK CONNECTION

Connect A/C power to the Power Input (G). Attach the included Wireless antennas via the threaded

RP-SMA connectors (K).

Connect the SDI output from your video Source to the HD-SDI input (I) on Slice.

Connect Slice to your network via the 10/100 Ethernet port (H).

Slice defaults to Master mode, which will create and

advertise its own network name (SSID). Your computer,

decoder, or mobile device connects directly to Slice

with no additional network equipment required.

1. On your computer or iOS device, open your

wireless networking utility.

2. Choose your Slice from the list of WiFi devices

in your area and connect to that network.

In Infrastructure mode, Slice connects to an existing network via a wireless access point or Ethernet

connection. Infrastructure mode allows Slice to communicate with all devices on the network and is required

for streaming to the Internet.

Wireless range can be greatly improved by using a wireless access point.

Connecting Slice to an existing wireless network:

POWER & CONNECT

OPTION A:

MASTER MODE: Connect Slice to one other device.

OPTION B:

INFRASTRUCTURE MODE: Add Slice to an existing network.

WiFi CONNECTION ON MAC/PC OR iPAD

1. Enter the main menu by pressing

▲

or ●.

Select Network Setup with ▼ and enter the

menu with

▲

2. Select Configure.

6. If prompted, enter your network password. Choose

characters with ▲ and ▼, choose the position

with

▲

and

▲

, and confirm with ●. To cancel, press ●.

4. From the WiFi Configuration menu, choose Scan.

3. Select Mode, and then choose Infrastructure.

The Wireless mode will be set.

8. Once configured, you can view the network status

by selecting Status from the Network Setup menu.

7. Choose Yes to apply the new network settings.

5. Select your preferred network, (the

icon

indicates a secured network), and the number

on the far right is the signal strength.

NEED MORE HELP?

1. Support forum: http://support.teradek.com → Contains tips, information and all the latest firmware & software updates.

2. Training videos: http://www.teradek.com/training

TERADEK SUPPORT STAFF: support@teradek.com or call 888−941−2111 ext2 (Mon−Fri 9am to 6pm PST)

SLICE’S WEB UI LOGIN

username: admin

password: admin

A: Video Input

B: Status

C: Broadcast/Record

D: Fault/Error

E: Menu Joystick

F: Stream Joystick

G: A/C Input

H: Ethernet Port

I: SDI In

J: SDI Out

K: Wireless Antenna

L: MIC Audio Input

M: Headphone Audio Output

N: USB Port

Encoder

M N

AC adapter

WiFi antennas

Summary of content (2 pages)

PAGE 1
2 NETWORK CONNECTION Encoder OPTION A: A B C D E F G H Slice defaults to Master mode, which will create and advertise its own network name (SSID). Your computer, decoder, or mobile device connects directly to Slice with no additional network equipment required. 1. On your computer or iOS device, open your wireless networking utility. 2. Choose your Slice from the list of WiFi devices in your area and connect to that network.
PAGE 2
3 STREAM (WEB UI LOGIN: username: admin password: admin) OPTION A: STREAM FROM SLICE TO THE INTERNET Configure your Slice for Internet streaming on Slice’s Stream Settings page. OPTION B: LOCAL MONITORING WITH iOS DEVICES AND TERACENTRAL 1. Download TeraCentral from the iTunes App Store. 1. Launch Slice’s configuration page by clicking Configure in TeraCentral. 2. Open the Wifi Settings and connect to Slice’s network (see section 2 for more information). 2.