Quick Start Guide

• OFF - Unit is powered o
• YELLOW - No wireless connection
• RED - Camera is recording
• ORANGE - PC/Bootloader mode
• WHITE - Checking RF module status
• GREEN - Wireless is synched
• BLUE - Wired-mode connection
Controller Status LED
The controller status LED indicates when the system is ON and provides the system’s current status
during operation.
5
The LENSMAP menu lets you create your own lens map(s) according to lens manufacturer and lens
type. Once a lens map has been created, you can SELECT it for use with the controller, EDIT the lens
map’s name and/or parameters, modify the lens map’s BEHAVIOR, or DELETE the map. Use the
following steps to create a lens map.
LENS MAPPING
Select whether the lens is a prime or zoom lens. If it’s a prime lens, enter the lens’ xed focal length
(e.g. 35mm, 85mm). For zoom lenses, enter the focal length range (e.g. 24-70mm, 70-200mm).
2
3
Select the lens brand, then create a name to identify the lens map.
Enter the CTRL.3 menu, then navigate to LENS>LENSMAP>CREATE.
1