Instruction Manual

© 2 0 1 4 . T e r a d e k , L L C P a g e | 11
2.2 Web-based Operation
All Beam TX and RX parameters (except the WiFi/LAN mode) can be configured via Beam’s web interface. The interface can be
accessed by connecting to the same network as Beam and opening the device’s IP address in a web browser. The current IP address
can be seen on Beam’s front panel display.
Beam TX
System Information
Item
Description
Product Name
Displays the product name.
Product Version
Firmware version number.
Input Video
Displays the video input resolution if a video signal is present.
Encoding
Indicates whether or not the Encoder is running.
Streaming
Displays the current encapsulation (RTP/TS2UDP), encoder mode (P2P or
Multicast), and whether or not the RTSP server is enabled.
Encoder Bitrate
Current Encoder Bitrate.
Streaming Interface
Current streaming interface: WiFi or Ethernet LAN.
Wi-Fi SSID/Channel
Disaplys the current WiFi SSID and channel (frequency): 36(5180MHz),
44(5220MHz), 149(5745MHz), or 157(5785MHz).
Receiver
Displays whether or not a Beam RX is connected.