Instruction Manual

© 2 0 1 4 . T e r a d e k , L L C P a g e | 14
channel audio, and 768kbps for stereo audio.
Audio Intercomm
Select On to allow for two-way stereo talkback communication.
Network Configuration
Item
Description
Ethernet IP
Displays the current IP address and allows users to set a new value.
Note that if the IP address is changed, you will need to reload the web
UI using the new address.
Ethernet NetMask
Displays the current subnet mask and allows users to set a new value.
Ethernet MAC
Displays the device’s MAC address.
Ethernet Gateway
Displays the Ethernet gateway IP address and allows users to set a new
value.
WiFi Channel
Displays the current WiFi channel. This value can be changed from
Beam’s front panel.
WiFi SSID
Displays the current WiFi SSID. This value can be changed from Beam’s
front panel.
WiFi Status
Indicates whether or not the WiFi is enabled.