Instruction Manual

© 2 0 1 4 . T e r a d e k , L L C P a g e | 23
Once connected, Beam TX will assign your device an IP address in the 192.168.2.x range. Beam TX’s web interface can be accessed at
192.168.2.1, and the RTSP stream (if RTSP server is enabled) can be opened with rtsp://192.168.2.1:8554/stream. Beam RX can be
found at 192.168.2.2.
Please see your computer or tablet’s user guide for information on connecting to Wireless networks.
Note: Beam operates on the 802.11a/n 5GHz band. Ensure that your device has a 5GHz compatible wireless adapter.
3. System Specifications
3.1 General
Video Compression
H.264 Baseline Profile Level 4.2 with de-interlacing
System Latency
70 ~ 80 millisecond end-to-end delay between Transmitter and Receiver
Digital Video In/Out
SD-SDI, HD-SDI, 3G-SDI
Video Port
TX: SDI input and looped output, RX: SDI output
Supported
Video Resolutions
SMPTE 244
480i59.94 (NTSC), 480i60 (861-D)
IEC61179-5
576i50 (PAL)
SMPTE 296M
720p23.98, 720p24, 720p25, 720p29.97, 720p30, 720p50, 720p59.94,
720p60
SMPTE 274M
1080i50, 1080i59.94, 1080i60,
1080PsF23.98,1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30,
1080p23.98, 1080p24, 1080p25, 1080p29.97,1080p30, 1080p50,
1080p59.94, 1080p60
SDI Compliance
SMPTE 259M
BT.656
SDTV Digital Signal/Data Serial Digital Interface
SMPTE 292M
BT.1120
1.5Gb/s Signal/Data Serial Digital Interface
SMPTE 425M
(option)
3Gb/s Signal/Data Serial Digital Interface
SMPTE 299M
16bit Digital Audio Format for SMPTE 292M
SMPTE 352M
Video Payload Identification for Digital Interfaces
Main Digital Audio
In/Out
TX/RX
SDI embedded audio: 48kHz 16-bit stereo linear PCM
Main Analog Audio
Out
RX
48kHz 16-bit stereo linear PCM with mini stereo phone output jack
Talk-Back Analog
Audio In/Out
RX/TX
8kHz 16-bit stereo linear PCM with mini stereo phone input/output
jack
Radio Power
Aggregate Power: 150mW (22dBm), 50mW (17dBm)/antenna
Radio standard
IEEE 802.11a/n: OFDM
Frequencies
U-NII-1 (5.15~5.25 GHz), U-NII-3 (5.725~5.85 GHz)