User Manual

Configuring the System
91
9. Complete the fields in the dialog box using the information in the table below, and click
Save.
The new record will appear in the Sector Division List.
Field Data to Enter
Sector/Division
The name of the sector or division as you want it to appear on the IMS
display.
Description
A brief description of the sector or division.
Profile
The number of the profile that has been configured in the RSN profile
for this sector/division.
Check-in
Interval
The amount of time, in seconds, that equals the check-in value in the
profile specifics.
Sort Order
The order in which you want this sector/division to appear on the PDA
display.
Important!
It is critical that the profile and check-in interval be entered with the same values
as those in the RSN Configuration Tool (RCT). If different values are entered, the
system may fail to operate properly.
10. To update a record, double-click to open the record or select the record and click the
Update icon, make your changes, and click Save.
11. To delete a record, select the record and click the Delete icon.
The following message appears: Are you sure you want to delete xxx?
12. To cancel the delete, click Cancel.
13. To delete the record, click Yes.
The record is deleted.