User Manual

Configuring the System
105
The following paragraphs describe each panel in more detail.
Left-hand Panel
This panel shows all of the configurations in their inherited (tree) structure, from the top-
level default configuration down to the RSN configurations.
This view allows you to select a specific configuration to be used when configuring a
specific type of RSN(s).
Select an item from the left-hand panel. All of the settings for that selection are loaded into
the right-hand panel. In the illustration above, the selection of Plug Man will cause all of the
behavior settings for the Plug Man to be pre-loaded in the right-hand panel.
Right-hand Panel
This panel serves as an editor to define the parameters for the currently selected left-hand
configuration (see left-hand panel above). There are approximately 70 parameters that can be
configured for each RSN in this section.
This section of the application is broken into three additional sections referred to as the Top,
Middle, and Bottom. Each section provides unique and pertinent information for the overall
behavior and settings for the selected left-hand configuration.
In the Top Section, you can edit general information about the selected configuration such as
its name, description and the default behavior profile associated with the selected left-hand
panel configuration.
The Middle section is broken down into several tabs with each tab supporting the editing of
specific types of configuration data. The following parameters are supported in this section:
• Behavior Profiles
• Class Information
• RSN User Data
• Configure User Data (Advanced mode only)
• In addition, the Current Behavior Profile section has several tabs to define specific
behavior characteristics for the selected configuration. These tabs include:
• No Motion
• Motion
• Shock
• Check-in