User Manual

Configuring the System
107
2. For our First Responder example, in the New Configuration field, enter the title of the
configuration to be associated with First Responder.
3. Click Add New Configuration.
The new configuration label will now appear under the First Responder label.
Repeat this process for as many configurations as required to support a department’s
personnel or equipment to be equipped with an RSN. Note that this process should be
completed for the entire list of configurations at this time. Once this is completed, RSNs can
then be associated with each of the configurations defined in the tree. See
Associating_RSNs_with_Configurations.
Canceling an Entry
At any time during the data entry process, in the Add Configuration dialog box, should you
decide the data is incorrect or not needed, click Cancel to close the dialog box and it will
discontinue the “add new configuration” process.
8.2.8 Associating RSNs with Configurations
Associating an RSN to a configuration follows the same process as for creating the
configuration.
To associate an RSN with a configuration, do the following:
1. Highlight the configuration which an RSN is to be associated with.
2. Either right-click the mouse, or from the File menu select Associate RSN to <name of
Configuration>.
The Add RSN dialog box opens displaying the empty RSN UID field.
The RSN Unit ID (UID) can be found on the RSN itself or from a list provided with the
equipment shipment. The UID is the number only, not the asterisks.