User Manual

Configuring the System
111
3. Click the Behavior Profiles tab.
Initially, three Behavior Profiles are supported (more will be supported in a future
release). As shown in our First Responder Plug Man example, begin by selecting the first
Behavior Profile with a default label of On Duty, Standby as shown above. Moving to
the right of this selection, the parameter settings for this profile are displayed. These
parameters have been inherited from the Firefighter configuration from the configuration
tree and each of these parameters can be edited for the specific requirements of the Plug
Man.
Editing Behavior Profiles
The items that are inherited can be identified by the blue vertical triangle next to the
parameter description or selection. Where these values have been inherited from can be
determined by hovering over the blue triangle (i.e., which configuration in the
configuration tree).
Note: Fields that cannot be edited are gray, and their adjacent triangles are also gray.
4. To edit an inherited parameter, right click on the upward-facing blue triangle adjacent to
the label.
In our First Responder example, the Override From First Responder pop-up opens.
5. Select Override from First Responder (the configuration name).
The field is no longer gray and becomes available for editing, as illustrated below for the
Profile Name and Description fields. Notice that the blue upward-facing triangle is now
a left-facing yellow triangle.