User Manual

Configuring the System
113
9. Continue to Configuring RSN Sensors.
8.2.10 Configuring RSN Sensors
Each RSN is equipped with internal sensors that provide specific capabilities to assure proper
operation of the RSN while ensuring the safety of the person or equipment associated with
the RSN. These sensor settings are defined within the RCT under the Behavior Profiles tab.
To accomplish the sensor configuration, the application has three tabs that are used to define
each sensor functions along with a tab for defining the RSN check-in time.
For the initial release, the sensors supported in the RSN are mutually exclusive for a given
profile. That is, an RSN's behavior profile cannot have both a Motion and Shock sensor
enabled within a single configuration. The RCT is designed to prevent you from allowing
this configuration to take place.
In addition to the Check-in tab, the supported RSN sensors and their associated tabs are:
No-Motion
Motion
Shock