User Manual

TeraHop Networks IMS Installation and Operation Manual V1.1 08-0000-01-R1
118
8.2.12 Default Behavior Profile
Once all of the Behavior Profile settings have been configured, the Default Behavior Profile
for each of the left-hand configurations can be selected. The Default Behavior Profile is the
Behavior Profile the RSN associated with a configuration will operate under until changed by
a user application. This field is located towards the top of the Middle section above the
Configuration Parameter tabs.
In the example we have been using, the Default Behavior Profile for the Plug Man is On
Duty, Standby. This is the Profile he will remain under until a user application changes his
assignment to one that uses At Incident, Safe or At Incident, Dangerous.
To change the default profile, do the following:
1. Override the default for the Default Behavior Profile field.
2. In the Default Behavior Profile field, click the drop-down arrow.
The list of available behavior profiles for this configuration appears.
3. Select the desired Default Profile from the available drop-down list.
4. Click the Save Configuration button at the bottom of the Middle section.