User Manual

Configuring the System
123
8.2.17 How to Wake Up or Troubleshoot an RSN
TeraHop Remote Sensor Nodes (RSNs) are shipped from the factory to the Channel Partner.
They are shipped in a deep sleep, and you need to 'wake' them up before you can configure
them for an end customer.
To wake up an RSN, you will use the RSN Configuration Tool (RCT) Cradle. The RCT
Cradle is a device with a 16-pin connector and LEDs to indicate the status of the RSN. The
RCT Cradle includes an RSN that has been tested and is known to be good.
Figure 15: RCT Cradle
The RSN has a shallow indent on the top of it. The Magnetic Reed Switch is under this
indent.
Figure 16: Magnetic Reed Switch Indent on RSN