User Manual

Configuring the System
127
LED Indicator Description Resolution
screen under RCR Parameters for Paging
Channel. This should be 78. If it is not,
return the RSN to TeraHop Networks.
NETWORK (1), then
HEARTBEAT (4),
then HEARTBEAT
(1) illuminate.
The RSN suddenly
returns to the
HEARTBEAT while
trying to register on
the network.
The registration has been rejected.
Check the Class ID using the RCT.
Bounces from
HEARTBEAT (4) to
NETWORK (1) back
and forth.
Never gets registered
on the network.
RSN is still waiting for a response to the
registration request.
All LEDs are
flashing.
RSN is not
responding. RSN is
constantly resetting.
RSN failed to get an EEPROM
signature. Reset the RSN by pressing the
black power switch in the RSN plug
cavity. If no change, return the RSN to
TeraHop Networks.
8.2.18 Downloading an RSN Configuration
Once all of the configuration parameter settings have been completed, the configuration is
now ready to be downloaded into an RSN. At the bottom of the left-hand panel
configuration tree there is a Program RSN section.
To configure an RSN via a direct connect to the PC, you will need a THN RCT Cradle, a
USB cable, and the RSN Configuration Tool (RCT).
8.2.18.1 Notes on Using the RCT Cradle
• Do not leave an RSN in the cradle for an extended period of time. After you have
completed your RSN test or download, immediately remove the RSN from the cradle.
• While running the download application, never unplug the USB cable, whether or not an
RSN is in the cradle. Always close the RCT application before unplugging the USB
cable.
• Although the RSN will work with very little pressure in the cradle, it is recommended
that you push the RSN to the bottom of the cradle so that it is completely seated.
• If you place an RSN in the cradle and there is no cradle light activity (blinking or solid)
on the RSN, remove the RSN and swipe it near the cradle magnet. Then try it again. If
the result is the same, depress the end of the black power switch inside the RSN plug
cavity for 10 seconds. Then try it again in the cradle. If the result is the same, return the