User Manual

TeraHop Networks IMS Installation and Operation Manual V1.1 08-0000-01-R1
130
4. Under Comm Port, click the drop-down list and select the correct Comm Port for use
with this device.
5. Click Get RSN.
The RCT will attempt to connect to the RSN and read its Unit ID (UID).
In a status box at the bottom of the Program RSN section, the application will report that
it has found an RSN, if the RSN has the right software version, and if that RSN has been
associated with a configuration in the tree above. The RSN configuration will be
highlighted in the left-hand panel. Once these parameters have been verified the
associated configurations will automatically be selected and the download button will be
enabled.
6. Click the Download button.