User Manual

Configuring the System
143
In the RCT, to download RSN factory defaults, do the following:
1. Remove the plug from the back of the RSN.
2. Place the RSN in the RCT Cradle.
3. Click the Advanced button, if necessary.
4. From the RCT menu in the top toolbar, select Advanced RSN Download.
The RSN Direct Connect Downloader window opens.
Notice that the Download button and Get RSN button work the same as they do on the
main RCT screen in the lower left corner.
5. Under Communication, click the Com Port drop-down arrow and select the port to
which the RCT Cradle USB cable is connected.
6. Click Get RSN.
7. Verify the RSN UID is the same as the label on the RSN.
8. In the Reset field next to the Download Factory Default button, click the drop-down
arrow and select one of the following: