User Manual

TeraHop Networks IMS Installation and Operation Manual V1.1 08-0000-01-R1
148
8.3.7 Set the Customer Type
As the defaults are already set for the First Responder market, no changes to the parameters
defined under this tab should be required unless the Customer Type is a commercial entity
and not Government.
Should the configuration be for a commercial entity, do the following:
1. Click the Class Information tab.
2. Override the default for the Customer Type field.
3. In the Customer Type field, click the drop-down arrow and select Commercial.
4. Click the Save Configuration button at the bottom of the Middle section of the screen.
The Customer ID is a fixed number assigned by TeraHop Networks and cannot be edited
from this screen.
8.3.8 Enter the Customer User Data
The last configurable parameter is the Customer User Data. This data is a block of memory
on the RSN that is available for the application to use as desired. In our First Responder
example, there are four data fields in this area that are configured based on you application
specifications. In the First Responder example used throughout these sections, the fields are
for screen name, asset type, service type, and a free-form text description. This may include
specifications about a piece of equipment or specific qualifications of an individual. This data
is what is passed on to your application when an asset is accessed.