User Manual

Table Of Contents

TeraHop Networks IMS Installation and Operation Manual V1.1 08-0000-01-R1

190

5. Take the first two digits of the Hex value (example: 04), reenter them, and convert

back to decimal by pressing the Dec radio button (example: 4). The result is A1.

6. Press the C button to clear

7. Select the Hex radio button, then reenter the second two digits of the Hex Area ID

(example: D2)

8. Select the Dec radio button to convert them back to decimal (example: 210). This

result is A2.

9. Combine the results of step 5 (A1) and step 8 (A2) into an IP Address 10.A1.A2.x

(example: 10.4.210.x)

The Gateway Server always uses an IP Address with the fourth octet of 1, meaning the

Gateway Severs IP Address with an Area ID of 5 would be 10.0.5.1. With an Area ID

1234 the Gateway Server’s IP Address would be 10.4.210.1.

Both the Area ID and IP Address are listed on the label on the back of the gateway

server.

11.7.2.2 Calculating Your IP Address Scheme

Hex Dec

My Area ID

The resulting IP Address is:

11.7.2.3 Connecting TeraHop Console Computer to the Internet

The TeraHop Console Computer requires a connection to the Internet. This connection

must be a wired connection via CAT5e cable or similar.

TeraHop Console Computer shall be located: