User Manual

TeraHop Networks IMS Installation and Operation Manual V1.1 08-0000-01-R1
38
Once you obtain the Configuration Editor software, do the following:
1. Connect a VGA monitor, keyboard with PS/2 Connector (USB with PS/2 adapter
acceptable), and a mouse with PS/2 connector (USB with PS/2 adapter acceptable) to
the MMR.
Figure 12: Back of ADMS Laptop Computer
2. Copy the MMR Configuration Editor application from the Documents section in the
TeraHop CRM to a Flash drive (245 MB or better).
3. Insert the Flash drive into the MMR lower right USB port.
4. Locate the TeraHop.MMR.Configurator.exe file on the Flash drive, and double-
click to execute.
When executed, the MMR Configuration Editor automatically displays the
CustomerID and AcceptFirstResponders options from the default location in the
MMR. See the illustration below. If you do not see this screen, see Configuration
Files Not Found on the next page for instructions on how to enter the path name to
these options.