User Manual

Software Installation and Update
39
5. In the CustomerID field, change the 70 to the CustomerID number that appears in
your IMS shipping papers.
6. Set the AcceptFirstResponders check box according to the instructions with the
TeraHop purchase information.
This check box ensures that any other First Responders with RSNs (including those
from other agencies) will appear on your IMS and can be accepted into an incident.
Improper setting will result in undesirable system operation.
7. Click Save.
8. Reboot the MMR by turning off the system with the ignition switch. Make sure the
MMR completely shuts down before turning it back on.
Configuration Files Not Found
When you insert the Flash drive into the MMR, if the configuration files cannot be found
from their default locations (the screen above does not appear), you will see the following
message: The configuration files could not be found. Click on Options to enter the paths
for the NLS and Merge configuration files.