User Manual

TeraHop Networks IMS Installation and Operation Manual V1.1 08-0000-01-R1
54
7.2 The TeraHop Console
The TeraHop Console (THC) is a software framework from which you can access several
TeraHop software applications and tools used in the setup and operation of the Incident
Management System (IMS) with Automated Accountability. The THC is installed on the
Administration Station (ADMS) laptop computer only.
From the TeraHop Console, you can start and run the following tools:
• RSN Configuration Viewer (RCV) to view configuration parameters from an attached
RSN and display the data in a report.
• TeraHop Data Transfer (TDX) Tool, which is used to extract end-customer IMS
incident logs;
• RSN Configuration Tool (RCT), which is used to set up end-customer configurations
(including behavior settings that will govern an RSN's operation), and download a
configuration to an RSN directly connected via a serial port.
• Gateway Configuration Tool (GCT), which is used to configure the settings (such as
IP addresses) of the end-customer's Gateway Router (GR), Gateway Server (GS), and
Mobile Messaging Router (MMR).
The THC add-ins are selected for installation when the TCH is installed. If you need to
re-install it, please contact TeraHop Networks Customer Service.
The THC is pre-loaded on the ADMS laptop computer. If you need to reinstall it, please
contact TeraHop Networks Customer Service.
The IMS PDA Application Configuration Tool (ACT), which is used to configure the
application for the end customer, is a separate application residing on the ADMS laptop
computer. The ACT is pre-loaded on the ADMS laptop computer. If you need to reinstall
it, please contact TeraHop Networks Customer Service.