User Manual

Using the IMS Software
65
7.10 Working with the RSN Configuration Viewer (RCV)
The RSN Configuration Viewer (RCV) is a TeraHop Console (THC) add-in application
that reads configuration and parameter data from a specific RSN and displays the data in
a report that may be printed or e-mailed.
The RCV works with the RCT Cradle.
Figure 13: RSN in RCT Cradle
You can complete reading the configuration data for one RSN, and then move
immediately on to reading the next RSN. After reading RSN data, you can save the data
to a file and e-mail the file to another person.
Note: Viewing the RSN data with the RCV does NOT alter the configuration of the RSN
being read.
Depending on your assigned user role, the RCV displays the following RSN data:
• Primary class
• First Responder indicator
• THC Customer ID and RSN Customer ID
• User data block(s)
• Each Behavioral Profile (total of three for User and Advanced roles; 16 for
Engineering roles)
• The four potential sensor events (Check-in, Shock, Motion, and No-Motion) for
User and Advanced roles
• The 16 potential sensor events for Engineering roles
• The six parameters for each sensor (Event Trigger, Sensor Configuration, Period,
Maintain, Reporting Period, and Magnitude Limit).
• Unit ID (UID)