User Manual

Table Of Contents

TeraHop Networks IMS Installation and Operation Manual V1.1 08-0000-01-R1

3. Connect the RCT Cradle to the computer on which the THC resides using the USB

cable provided with the RCT Cradle.

Note: You will not see any lights on the RCT Cradle until an RSN is placed in the

cradle.

4. On the RSN Configuration Viewer screen, under Communications click the drop-

down-arrow and select the communications port to which the RCT Cradle is

connected.

5. Remove the plug from the back of the RSN and set the plug and the screws aside.

6. Place the RSN whose data you want to read in the RCT Cradle as shown below.

Ensure that the connector end of the RSN makes contact with the connector in the

cradle.